Technical information for problem troubleshooting using our products in workshops.
- Problem: Oil in the cooling system Solution: Apply 1 can Radiator Flush (33326) + 1 can Fuel System Cleaner (33028) into the contaminated cooling fluid, Run vehicle until it reaches normal temperature and then flush the system. or 1 can Radiator Oil Cleaner 2-C (33336-1)
- Problem: Water in the lubrication system (white emulsion) Solution: Apply 1 can Oil System Cleaner (33018) + 1 can Fuel System Cleaner (33028) to the old oil! Run vehicle until it reaches normal temperature and then flush the system.
- Problem: High oil consumption, hydraulic valve clattering Solution: Clean oil and lubrication system with Oil System Cleaner (33018). Apply 1 can Oil System Care (33048) with the new oil. Drive vehicle approx. 3 - 5 km! If there no mechanical defects, an oil consumption reduction and noise reduction is achieved!
- Problem: Fuel pump rattling Solution: Add 1 can Fuel System Cleaner (33028) into the tank .Fuel lubrication is restored, water condensation is binded and burned in the combustion chamber.
- Problem: Sticky valves Solution: Clean the air intake system with Clear Flow (34011) and Triple X Plus (33648). (for Diesel + Petrol engines) See operating instructions Clear Flow (34011) or Power Clean Premium (34018) Clean fuel system petrol with Fuel System Cleaner (33028) and the air intake system with Triple X Plus (33648). Clean fuel system diesel with Diesel System Cleaner (33038) and the air intake system with Triple X Plus (33648). or Spray 1 can Throttle Body Cleaner (37012) in the air intake system.
- Problem: Increased smoke and soot formation (Diesel) Solution: Apply 1 can Diesel System Cleaner (33038) or 1 can Diesel System Super Clean (33398) into the tank or directly on the injection system and clean with Power Clean Premium (34018)! or Apply 1 can DPF / Catalyst Cleaner (33151) through the hose to the DPF / Catalyst (See operating instructions)
- Problem: Rust build up in the cooling system (brown water), water pump noises, thermostat malfunction Solution: Apply 1 bottle of Radiator Flush (33326) to the contaminated cooling fluid, run vehicle to normal temperature and the flush the system. Apply 1 bottle of Radiator Conditioner (33306) to the new cooling fluid.
- Problem: Lambda value not correct Solution: Apply 1 can of Fuel System Cleaner (33028) into the tank and drive for approx. 5 bis 10 km. Carry out a new measurement! or Apply 1 can OXICAT – Oxygen Sensor and Catalytic Converter Cleaner (33230) to the fuel tank.
- Problem: Shifting and bearing noises Solution: Transmission: add 10 % of Oil System Care (33048) instead of transmission fluid. Engine: add 1 can Oil System Care (33048)! Automatic Transmission: clean with ATF Evolution Premium (34090-1) and 1 can Automatic Transmission Flush (33179), then add 1 can Automatic Transmission Conditioner (33178) to the new fluid.
- Problem: High fuel consumption, unstable idle speed Solution: Add 1 can Fuel System Cleaner (33028) to the fuel tank! Clean the throttle body area with Throttle Body Cleaner (37012)
- Problem: Jerking in the partial load area Solution: Clean oil and lubrication system with Oil System Cleaner (33018) and make an oil change! Add 1 can Fuel System Cleaner (33028) to the fuel tank! Clean the throttle body area with Throttle Body Cleaner (37012)
- Problem: EGR carbonized – consequences: engine doesn’t start blue smoke after start constantly black smoke non-smooth idling engine does not respond to the throttle temporarily performance too low Solution: Clean the air intake system with Clear Flow (34011) and Triple X Plus (33648). (for Diesel + Petrol engines) See operating instructions Clear Flow (34011)
Our products have a cleaning and preventive effect but cannot repair complex defects.
